Electric CNC bending machine with advanced control system

Electric Servo Drive: Precision Without Hydraulic Hassle

At the core of this machine is a 3-axis electric servo drive system (expandable to 6 axes) that outperforms traditional hydraulic setups in every key metric. The servo motor directly powers the ram and backgauge, delivering instantaneous response—ram speed adjusts from 0.1mm/s to 15mm/s in milliseconds, ensuring smooth movement even for delicate bends. Unlike hydraulics, which suffer from pressure drops and oil leaks, the electric drive maintains consistent force (30T to 120T, configurable) with ±0.5% accuracy, making it ideal for bending thin-gauge sheets (0.5mm aluminum) to medium-thick plates (8mm steel).

Energy efficiency is another standout: the electric system consumes 60% less power than hydraulic equivalents, as it only draws energy during operation (not idle). It also runs quieter (≤65dB) and requires minimal maintenance—no oil changes, filter replacements, or seal repairs—slashing downtime and operating costs over the machine’s lifespan.

Advanced Control System: The Brain Behind Flawless Bends

What truly sets this machine apart is its 18.5-inch multi-touch CNC control system, engineered for both beginners and seasoned operators. Built on a Linux-based operating system (fast, stable, and virus-resistant), the control features a user-friendly interface with drag-and-drop functionality, allowing operators to create or modify bending programs in minutes. It comes pre-loaded with a library of 5,000+ material profiles (including steel, aluminum, copper, and stainless steel), each with optimized bending parameters (angle, force, speed) to eliminate trial-and-error.

The control’s advanced features elevate precision and efficiency:

1.3D Simulation & Collision Detection: Renders the entire bending process in 3D, letting users visualize bends, check for tool/workpiece collisions, and adjust tool paths before pressing—reducing material waste by up to 40%.

2.Auto-Angle Compensation: Integrates with a laser angle sensor (mounted on the ram) to measure bends in real time and adjust the ram position automatically, ensuring ±0.1° angle accuracy even for work-hardening materials.

3.Batch Management: Stores up to 10,000 programs and supports barcode scanning—scan a part’s barcode, and the machine recalls the exact setup (tooling, backgauge position, force) for seamless batch production.

4.Remote Monitoring & Diagnostics: Connects to your workshop’s MES system via Wi-Fi/Ethernet, allowing managers to track production metrics (bends per hour, downtime) and technicians to troubleshoot issues remotely—minimizing service delays.

Precision Tooling & Worktable: Built for Consistency

The machine’s accuracy is reinforced by precision-ground tooling and a rigid worktable. The upper punches and lower dies are machined from hardened alloy steel (HRC 60) with a mirror finish (Ra 0.2μm), ensuring burr-free bends and long tool life (up to 100,000 bends). A quick-change tooling system lets operators swap tools in 2 minutes flat—critical for small-batch, multi-part production.

The worktable features a segmented design with adjustable supports, and its surface is coated with a wear-resistant ceramic layer to prevent scratches on polished materials. The CNC-controlled backgauge (equipped with dual ball screws) offers ±0.01mm positioning accuracy, ensuring repeatable bends across hundreds of parts.

Main technical parameter

FAQ

How To Use The Machine After Receving The Machine？

Firstly , when you got machine , you need to contact with us ,our engineer will together with your to deal with it ,secondly ,we will send you user manual or videos before you get the machine ,Thirdly Our professional technician online teach you until you can use it well by yourself.

Why Should You Buy From Us Not From Other Suppliers?

We are professional equipment manufacturer, Our service as below: 1. Factory supply directly 2. 12 months warranty for the whole machine 3. Friendly English version manual and operation video 5. Engineer available to service machinery overs.

What Services Can We Provide?

Accepted Delivery Terms: FOB,CFR,CIF,EXW； Accepted Payment Currency:USD,EUR,CNY.

How To Choose A Suitable Machine?

You can tell us the working piece material, size, and the request of machine function. We can recommend the most suitable machine according to our experience. It can be customized according to your requirements.

Do You Have A Setup And Equipment Commissioning Service?

Yes,we have. The machine was installed and debugged before delivery. You can use the machine directly after receiving it. Of course, we also could let our technologists go to your country to install and debug.