PGT disc filter

product details PGT series metal mining disc vacuum filter fully uses the advantages of similar products from abroad for reference. Aiming at the characteristics of high density of metal minerals, fast settling and strong impact of solid particles on the filtrate pipe, the overall performance and reliability optimization design between components are carried out to ensure the excellent dehydration index of metal minerals obtained in solid-liquid separation. Through the successful practical application of users, it has been proved that the main technical indexes and performance have reached the level of advanced products at home and abroad. Main features: 1. The dewatering holes of the fan-shaped filter plate are evenly distributed, the porosity is reasonable, the size of the ribs is large, it is made of high-strength engineering plastics, and the service life is increased by 1-1.5 times. 2. The filtration area of filtrate pipe is large, and the area of distribution head and abdominal cavity is large, which improves the air extraction rate and filtrate discharge effect. 3. Wear resistant nylon monofilament or double-layer multifilament filter cloth improves the dehydration rate and is not easy to block, thus prolonging the service life. 4. Multi point dry oil pump centralized automatic lubrication. 5. The filter cloth automatic cleaning device keeps its good dehydration effect. 6. Horizontal forced variable speed mixing, rubber and graphite packing and triple seal of water pressure difference at shaft end to ensure no leakage. 7. Main drive CVT, according to the concentration of materials and flow regulation (AC speed motor or inverter), in order to achieve the ideal working effect. 8. Each plate is composed of 20 filter fan plates, which strengthens the control of filtration process and makes the cake thickness uniform. 9. The friction plate is made of special wear-resistant boron cast iron, which has the advantages of combining hardness with softness, good sealing effect and long service life. 10. The filtrate pipe is a high-strength and wear-resistant ceramic composite steel pipe, which improves the service life by more than 10 times. 11. Remove the upper and lower flanges at the interface between the filtrate pipe and the filter fan, and use the mold to locate and weld directly, so as to reduce 90% possible air leakage points