|
Magnetic wet separator
Magnetic wet separators constitute an important part of the
product range and are known for advanced engineering design and
excellent performance.As a result of continuous development in
separator technology WE can offer a complete line of magnetic
wet separators to the mining and mineral industries.
Magnetic wet separator models
Wet permanent magnetic separators are offered in sizes of
dia.1200 mm and 916mm in Lengths of up to 3000mm. Three basic
separator designs are available for cobbing, roughing and
finishing/cleaning applications. Each type can be supplied in
single drum or multiple drum stages of taco nite or magnetite
and also for recovery for magnetic medium in dense media plants.
The stationary magnet yoke is an assembly of strontium-ferrite
permanent ceramic magnets. The rotating drum is available with
optional rubber or stainless steel covers. The magnetic flux
pattern will match the tank configuration for optimum
performance.
Magnetic wet separator dia 916 x 300 mm is the smallest full
scale separator in the 916 series and is primarily used for
pilot plant tests. The separator can be delivered in concurrent,
counter current and counter rotation versions.
Magnetic wet separator for laboratory use have drum dimensions
dia. 600 x 285 mm and dia. 200 x 100 mm and are suitable for
batch or continuous testing. TMagnetic wet separators have been
developed in close cooperation with the Swedish mining industry
for treatment of magnetite. A prime consideration in its
advanced engineering design has been high capacity, improved
metallurgical performance and highest availability. The
separator is constructed as a separate unit consisting of drum
with magnet yoke, tank and drive package, all mounted on a
heavy-duty frame. The design of the frame allows any number of
units to be connected in series as multi-stage installation.
This design offers a flexible flow sheet layout.
The drum shell is made of non-magnetic stainless steel with
abrasion-resistant wear cover and sealed heads of cast rigid
aluminum alloy. The drum shaft runs in spherical, self-aligning
anti-friction bearings.
adjustment of magnet yoke and drum of Magnetic wet separator
The magnet yoke is mounted on the stationary drum shaft and its
position can be adjusted (+/-35 °) by a lever at the end of the
drum shaft to optimize running conditions in accordance with
tank design and type of ore. The gap between tank and drum,
which determines the pulp flow speed, can be adjusted vertically
by shims inserted under the bearing housing and shaft support.
Horizontal adjustment is by slotted holes. |
